Removal and installation the horn (Renault Sandero 1)

You will need: a 10 mm wrench, a 13 mm socket head, and a flat-blade screwdriver.

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the front bumper (see "Removal and installation the front bumper").



3. Loosen the nut securing the horn bracket to the car body...



4. ...and remove the horn assembly with the bracket.



5. Use a screwdriver to pry up the wiring harness connector retainer...





6. ...and take it off.



7. Disconnect the wiring harness connector from the horn with the bracket.

8. Loosen the nut securing the bracket to the horn and remove the bracket.

9. Install the parts in the reverse order of removal.