Exterior (external body elements) Renault Sandero 1

Body — design features
The body of Renault/Dacia Sandero cars is a five-door hatchback, load-bearing structure, all-metal. The body frame includes the base, sidewalls, roof and parts connected to each other by electric welding (point, seam...

Removal and installation wheel mudguards and fender liners
The front and rear wheel arches are fitted with mudguards that protect the body from the abrasive effects of sand and stones thrown up by the wheels. Mudguards mounted behind the front wheels protect the body sills. The...

Removal and installation bumpers
You will need: a flat-blade screwdriver, 10 mm keys and a TORX T30. You will need: a flat-blade screwdriver, 10 mm keys and a TORX T30. 2. ...and on the left, and then remove both lower parts of the mudguards (see "...

Removal and installation the rear bumper
You will need: a 10 mm socket head, T20 and T30 TORX keys, and a flat-blade screwdriver. 1. In the arches of both rear wheels, unscrew one screw securing the bumper to the body. 2. Unscrew two screws from the bottom of...

Removal and installation the radiator grille
The radiator grille is made as one piece with the front bumper, so if damaged, it must be replaced only together with it (see " Removal and installation the front bumper ").

Removal and installation the front wheel
You will need: all the tools needed to remove the mudguard and front fender liner (see " Removal and installation wheel mudguards and fender liners "), front bumper (see " Removal and installation the front bumper "),...

Removal and installation the air intake box
You will need a flat-blade screwdriver. 1. Open the hood and place it on the support. 2. Remove the rear hood seal from the front shield flanging. 3. Remove the windshield washer hose from the holder on the air intake...

Removal and installation the hood
You will need a 10 mm wrench. Helpful Hint: The hood is quite heavy and bulky, so remove and install it with an assistant. 1. Open the hood and place it on the support. 2. Remove the windshield washer hose from the...

Removal, installation and adjustment of the hood lock and drive
The hood lock, combined into one unit with a safety hook, is installed on the upper shelf of the radiator frame. The lock latch, made in the form of a bracket from thick steel wire, is welded to the reinforcement of the...

Windscreen wiper
This subsection describes the removal of the wiper brushes, levers and trapezoid. The process of removing and installing the gear motor is described in Section. " Electrical equipment " (cm. " Windshield wiper gear...

Replacing windshield wiper arms
You will need: a 13 mm wrench and a flat-blade screwdriver. 1. Open the hood and place it on the support. 2. Use a screwdriver to pry... 3. ...and remove the decorative cap from the windshield wiper arm mounting nut. 4....

Removal and installation the windshield wiper linkage assembly with gear motor
You will need: keys "10", "24", a screwdriver with a flat blade. 1. Remove the air intake box grille (see " Removal and installation the air intake box grille "). 2. Use a screwdriver to pry... 3. ...and remove the...

Rear Window Wiper
This subsection describes the removal of the wiper blade and arm. A special key is required to remove the wiper motor reducer. If you need to remove the motor reducer, contact a specialized car service. Replacing the...

Replacing the rear window wiper arm
You will need a 13 mm wrench. 1. Remove the protective cap from the nut securing the lever to the wiper motor shaft. 2. Unscrew the nut... 3. ...and remove the lever from the gear motor shaft. 4. Install the rear window...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Exterior (external elements) Renault 19 (1988-1996)
➽ Body and interior: Exterior (external elements) Renault Laguna 2 (2001-2007)
➽ Body and interior: Exterior and interior Renault Kangoo 1 (1997-2007)
➽ Body and interior: Exterior (external elements) Renault Clio 1 (1990-1998)
➽ Body and interior: Exterior (external elements) Renault Symbol 1 (1999-2008, petrol)
➽ Body and interior: Exterior (external elements) Renault Logan 2 (2012-2020)

Link to this section in different formats

TEXTHTMLBB Code

Sandero 1 (2007-2012, petrol)