Exterior (external body elements) Renault Clio 1

General description of the body
The body and underbody are made from stamped steel and form a single unit, eliminating the need for a separate chassis. The range of models described includes three- and five-door hatchback versions, in addition, a van...

Maintenance — body and underbody
The overall condition of a car's body significantly affects its estimated value. Servicing the body is simple, but it needs to be done regularly. Neglecting these procedures, especially after minor damage, can quickly...

Upholstery and carpet care
Mats should be brushed or vacuumed regularly to prevent them from accumulating gravel and sand. If the mats are heavily soiled, remove them, clean or sponge them and reinstall them, making sure they are dry first. The...

Minor body damage — restoration
Note: For more detailed information on body repair, please refer to the dedicated book "Body Repair Guide." This publication includes detailed information on such aspects as treating corroded areas, painting, repairing...

Significant body damage — restoration
If serious damage has occurred, it is best to entrust the repair to professionals. If the damage is caused by a collision, it is also necessary to check the body geometry, which can only be performed by specialists...

Bumpers — removal and installation
Front bumper - models of versions "1" and "2" Removal 1. On models equipped with fog lights, disconnect the negative battery cable. 2. Remove the radiator grille panel ( see Chapter 7 ). 3. Remove the front license...

Radiator Grille Panel — removal and installation
Removal 1. Open the hood. 2. Carefully pry up the screw caps on the grille panel with a screwdriver, then remove the screws (see illustrations). 7.2a. Use a screwdriver to pry off the plugs... 7.2b.... and remove the...

Windshield Deflectors — removal and installation
Note: There are two windshield fairings (one on each side). Even if only one panel needs to be removed, it is preferable to remove both panels as an assembly and then separate the two parts from each other. Removal 1....

Hood and hinges — removal and installation
Hood Removal 1. Have an assistant support the hood in the open position. 2. If the original hood is to be installed, mark the position of the hinges on its front edge to facilitate adjustment of its position during...

Hood Lock Components — removal and installation
Assembling the hood lock Removal 1. Open the hood. 2. Mark the position of the lock on the partition to facilitate adjustment of the position during installation. 3. Remove the two mounting bolts and washers, then lift...

Mirrors — removal, installation and replacement
External mirror Removal 1. On models equipped with power mirrors, disconnect the negative battery cable. 2. Carefully pry the exterior mirror mounting screws away from the front edge of the door using a screwdriver (see...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Exterior (external elements) Renault Laguna 2 (2001-2007)
➽ Body and interior: Exterior and interior Renault Kangoo 1 (1997-2007)
➽ Body and interior: Exterior (external elements) Renault Symbol 2 (2008-2013, petrol)
➽ Body and interior: Exterior (external elements) Renault Logan 2 (2012-2020)
➽ Body and interior: Exterior (external elements) Renault Sandero 1 (2007-2012, petrol)
➽ Body and interior: Exterior (external elements) Renault Fluence 1 (2009-2020, petrol)

Link to this section in different formats

TEXTHTMLBB Code

Clio 1 (1990-1998)