Car body care Renault Sandero 1

General information about car body care
To keep the car looking good for longer, regularly monitor the condition of the paintwork of the body and its fittings. Body care consists of regularly washing and polishing the paintwork, described in this subsection.

Lubrication of body fittings
To increase the service life of the body, lubricate the rubbing parts at each maintenance (at least every 15,000 km or once a year). If creaking or sticking occurs, immediately clean the relevant parts and then apply...

Cleaning the drainage holes of the body
During operation, moisture accumulates in the cavities of the thresholds, doors and trunk lid, causing corrosion. Drainage holes located at the bottom of the thresholds, doors and in the trunk lid serve to remove...

Car wash
The basis of car body care is regular washing and treatment with special protective compounds. You can wash the body at a specialized car wash (only manually, without using mechanical brushes) or independently in places...

Polishing of paintwork
Helpful advice: Do not store your car under a rubber cover and do not place rubber objects on the painted surfaces of the body: they leave marks on the paintwork (especially light) dark spots that cannot be removed by...

Engine bay wash
Warning: To prevent environmental contamination, wash the engine and engine compartment in designated areas equipped with a sewer or local wastewater treatment plant. During vehicle operation, dirt and oil deposits...

Anti-corrosion protection of the body
During everyday use of a car, the paintwork and anti-corrosion coating of the body is exposed to an aggressive environment: anti-icing reagents (in winter time), sand, small stones, vibration and temperature changes,...

Preparation and anti-corrosion treatment of hidden cavities of the body
Due to the use of complex technological equipment and the need for high-quality work, it is recommended that the treatment of hidden cavities be performed only at vehicle service stations. The order of operations for...

Body sealing
Sealing is ensured by using rubber seals, adhesives, sealing mastics, rubber plugs that close technological openings, and careful adjustment of mating parts. When removing and installing seals with metal frames, do not...

Care of interior trim panels made of polymeric materials
Do not use washing powders, caustic soda or gasoline-based cleaners to clean the interior trim. Regular soap and warm water are perfect for this purpose. Stubborn dirt can be easily removed with a soft brush (with water...

Caring for upholstery and carpets
Clean your car's carpets and interior panels every three months (if necessary, this work can be carried out more often). To remove dust and debris, and to clean the mats, you can use a hard brush. After that, the mats...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ General information: Daily maintenance Renault Logan 1 (2004-2012, petrol)
➽ User manual: Car care Renault Duster 1 (2009-2017)
➽ General information: Car care Renault Symbol 1 (1999-2008, petrol)

Link to this section in different formats

TEXTHTMLBB Code

Sandero 1 (2007-2012, petrol)