Dors, locks and windows of car Renault Sandero 1

Removal and installation the front door trim
You will need a TORX T20 key. 1. Remove the front door lock actuator inner handle (see " Replacing the inner handle of the front door lock drive "). 2. Remove the speaker from the acoustic system. 3. Remove the screws...

Front door glass replacement
You will need: TORX keys T20, T30. 1. Remove the front door trim (see " Removal and installation the front door trim "). 2. Lower the glass completely and remove its inner seal. 3. Raise the glass so that the window...

Replacing the front door window regulator
You will need a 10 mm wrench. 1. Remove the front door glass " Front door glass replacement "). Note: It is not necessary to remove the glass from the door, it is enough to disconnect it from the window lifter and fix...

Replacing the front door outer handle
You will need a 10 mm wrench. 1. Raise the glass and remove the front door trim (see " Removal and installation the front door trim "). 2. Unfasten the outer handle rod retainer and disconnect the rod from the lock...

Replacing the inner handle of the front door lock drive
You will need a TORX T27 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...

Replacing the front door lock switch
You will need: all the tools necessary to remove the front door trim, as well as pliers. 1 Raise the window and remove the front door trim (see " Removal and installation the front door trim "). 2. Unfasten the lock...

Replacing the front door lock
You will need: all the tools necessary to remove the trim and glass of the front door, as well as TORX T30 and T40 keys. 1. Remove the front door trim (see " Removal and installation the front door trim "). 2. Remove...

Replacing the front door opening limiter
You will need: all the tools necessary to remove the front door trim, as well as a TORX T40 key and a 10 mm socket head. 1. Remove the front door trim (see " Removal and installation the front door trim "). 2. Remove...

Removal and installation front doors
You will need: all the tools necessary to remove the upholstery and the front door opening limiter, as well as a 13 mm spanner. 1. Remove the front door trim (see " Removal and installation the front door trim "). 2....

Removal and installation the rear door trim
You will need a TORX T20 key. 1. Remove the inner handle of the rear door lock actuator (see " Replacing the inner handle of the rear door lock actuator "). 2. Remove the window lift handle by pulling it towards you,...

Rear door glass replacement
You will need: all the tools necessary to remove the rear door trim, as well as a TORX T20 key. 1. Remove the rear door trim (see " Removal and installation the rear door trim "). 2. Lower the glass completely and...

Replacing the rear door window regulator
You will need: all the tools necessary to remove the upholstery and glass of the rear door, as well as a 10 mm wrench. 1. Remove the rear door trim (see " Removal and installation the rear door trim "). 2. Remove the...

Replacing the outer rear door handle
You will need: the tools necessary to remove the rear door trim, as well as a 10 mm wrench. 1. Raise the glass and remove the rear door trim (see " Removal and installation the rear door trim "). 2. Unscrew the two nuts...

Replacing the inner handle of the rear door lock actuator
You will need a TORX T20 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...

Replacing the rear door lock
You will need: all the tools necessary to remove the trim and glass of the rear door, as well as TORX keys T30 and T40, a flat-blade screwdriver. 1. Remove the rear door trim (see " Removal and installation the rear...

Replacing the door opening limiter
You will need: all the tools necessary to remove the rear door trim, as well as a TORX T30 key, a 10 mm socket head. 1. Remove the rear door trim (see " Removal and installation the rear door trim "). 2. Remove the...

Removal and installation the rear door
You will need: tools necessary for removing the upholstery and the rear door opening limiter, as well as a 13 mm spanner. 1. Remove the rear door trim (see " Removal and installation the rear door trim "). 2. Disconnect...

Replacing the tailgate stops
1. Open the tailgate and lock it in the open position (for example, a wooden block of suitable length) or ask an assistant to support her. 2. Using a screwdriver, pry the upper hinge lock of the stop outward... 3. ......

Removal and installation the rear door trim
You will need a TORX T30 key. 1. Open the tailgate. 2. Remove the two screws securing the trim to the tailgate... 3. ...and remove the trim from the tailgate. 4. Install the tailgate trim in the reverse order of removal.

Replacing the tailgate lock and latch
You will need: TORX keys T30, T40. 1. Open the tailgate. 2. Remove the two screws securing the lock to the door panel... 3. ...and remove the lock by disconnecting the switch rod from the lock lever. 4. Install the lock...

Replacing the tailgate lock switch
You may need pliers. 1. Remove the rear door trim (see " Removal and installation the rear door trim "). 2. Remove the rod by disconnecting it from the switch lever. 3. Turn the switch lock counterclockwise... 4....

Removal and installation the tailgate
Note: The tailgate is quite heavy and bulky, so we recommend removing it with an assistant. You will need: a flat-blade screwdriver, a 10 mm wrench. 1. Disconnect the additional brake light wiring harness connector (see...

Removal and installation the fuel tank filler pipe hatch cover
You will need a TORX T30 key. 1. Open the fuel tank filler cap... 2. ...unscrew the two screws securing the cover and remove the cover. 3. Install the filler pipe cover in the reverse order of removal. Note: Before...

Replacement of fixed body glazing
The windshield and the rear door glass are glued into the body openings. They are replaced using the same techniques. The work is shown using the windshield as an example. You will need: a flat-blade screwdriver, an...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Doors, locks and windows Renault Logan 1 (2004-2012, petrol)
➽ Body and interior: Doors, locks and windows Renault Symbol 1 (1999-2008, petrol)
➽ Body and interior: Doors, locks and windows Renault Kangoo 1 (1997-2007)
➽ Body and interior: Doors, locks and windows Renault Scenic 1 (1996-2003)
➽ Body and interior: Doors, locks and windows Renault Espace I and II (1984-1996)
➽ Body and interior: Doors, locks and windows Renault Clio 1 (1990-1998)

Link to this section in different formats

TEXTHTMLBB Code

Sandero 1 (2007-2012, petrol)