Rear door glass replacement (Renault Sandero 1)

You will need: all the tools necessary to remove the rear door trim, as well as a TORX T20 key.

1. Remove the rear door trim (see "Removal and installation the rear door trim").



2. Lower the glass completely and remove its inner seal.



3. Raise the glass so that the bolts securing the glass clip to the window lifter slider are positioned opposite the technological holes in the door panel. Holding the glass, unscrew the two screws securing the clip to the slider.



4. Unscrew the bolt securing the guide to the door through the technological hole in the door panel.





5. Pull down a little...



6. ...and remove the guide.



(Source link is located on renaultbook.ru)

7. Remove the glass from the door by pulling it upwards and turning it in the door opening.



8. If necessary, remove the fixed glass by tilting it forward.

9. Install the rear door glass and all removed parts in the reverse order of removal.