Replacing the front door lock switch (Renault Sandero 1)

You will need: all the tools necessary to remove the front door trim, as well as pliers.

1 Raise the window and remove the front door trim (see "Removal and installation the front door trim").



2. Unfasten the lock switch rod retainer and disconnect the rod from the lock lever.



3. Grasping with your hand (or with pliers if the retainer is installed with great tension) the bent edge of the switch spring lock, remove the lock by moving it in the direction of the arrow...



4. ...and remove the switch together with the rod from the hole in the outer door panel.





5. To replace the switch, disconnect the rod A from the lever of the old switch by turning it in the hole in the switch lever and install it on the new switch. Replace the spring retainer B if it is severely deformed or has lost its elasticity.

6. Install the front door lock switch and all removed parts in the reverse order of removal. Before installation, lubricate the lock switch mechanism with silicone grease.

(This article is taken from the website www.RenaultBook.ru)