Share with friends:
Car engine cooling system Renault Sandero 1
Cooling system — design features
Engine cooling system liquid (with forced circulation of liquid), sealed, with expansion tank. The system is filled with ethylene glycol based liquid (antifreeze), non-freezing at ambient temperatures down to -40°C....
Engine cooling system liquid (with forced circulation of liquid), sealed, with expansion tank. The system is filled with ethylene glycol based liquid (antifreeze), non-freezing at ambient temperatures down to -40°C....
Checking the cooling system hoses and connections
1. Open the hood and inspect the underhood space. When inspecting the engine, pay attention to the presence of coolant in the expansion tank, the integrity of the rubber hoses, radiator... 2. ...and thermostat housing....
1. Open the hood and inspect the underhood space. When inspecting the engine, pay attention to the presence of coolant in the expansion tank, the integrity of the rubber hoses, radiator... 2. ...and thermostat housing....
Replacing the coolant
According to the manufacturer's recommendation, the coolant should be replaced after 6 years of operation or 90 thousand km of mileage (whichever comes first). Note: Fill the cooling system with GLACEOLRX antifreeze...
According to the manufacturer's recommendation, the coolant should be replaced after 6 years of operation or 90 thousand km of mileage (whichever comes first). Note: Fill the cooling system with GLACEOLRX antifreeze...
Removal and installation the expansion tank
You will need: a 10 mm socket head, an extension, pliers, and a container for draining the coolant from the expansion tank. 1. Use pliers to squeeze the clamp securing the steam outlet hose and slide it along the hose....
You will need: a 10 mm socket head, an extension, pliers, and a container for draining the coolant from the expansion tank. 1. Use pliers to squeeze the clamp securing the steam outlet hose and slide it along the hose....
Removal and installation of the electric fan of the radiator of the engine cooling system
1. Remove the power steering fluid reservoir from the bracket and carefully move it to the side. 2. Open the holder and remove the power steering fluid reservoir hose from it. 3. Open the air conditioner compressor tube...
1. Remove the power steering fluid reservoir from the bracket and carefully move it to the side. 2. Open the holder and remove the power steering fluid reservoir hose from it. 3. Open the air conditioner compressor tube...
Replacing the cooling system radiator
You will need: 7 mm and TORX T30 keys, 10 mm socket head, pliers. 1. Drain the coolant (see " Replacing the coolant "). 2. Remove the front bumper (see " Removal and installation the front bumper "). 3. Remove the two...
You will need: 7 mm and TORX T30 keys, 10 mm socket head, pliers. 1. Drain the coolant (see " Replacing the coolant "). 2. Remove the front bumper (see " Removal and installation the front bumper "). 3. Remove the two...
Replacing the water pump
Remove the pump for repair or replacement if there is a coolant leak or if there is noise during operation that exceeds the normal level. If faulty, replace the water pump assembly. You will need: socket heads "10",...
Remove the pump for repair or replacement if there is a coolant leak or if there is noise during operation that exceeds the normal level. If faulty, replace the water pump assembly. You will need: socket heads "10",...
Removal and installation the thermostat
The need to remove the thermostat may arise for its replacement if the engine temperature is unstable: overheating or insufficient heating. To check the thermostat on a car, start a cold engine and touch the lower...
The need to remove the thermostat may arise for its replacement if the engine temperature is unstable: overheating or insufficient heating. To check the thermostat on a car, start a cold engine and touch the lower...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Other sections on other Renault models
➽ Power unit: Cooling system Renault Logan 2 (2012-2020)
➽ Power unit: Cooling system Renault Laguna 2 (2001-2007)
➽ Power unit: Cooling and lubrication system Renault Fluence 1 (2009-2020, petrol)
➽ Power unit: Cooling system Renault Symbol 2 (2008-2013, petrol)
➽ Power unit: Cooling system Renault Megane 1 (1995-2002)
➽ Power unit: Cooling system Renault Espace I and II (1984-1996)
Link to this section in different formats
TEXTHTMLBB Code
- General information
- Structure of car
- User manual
- Troubleshooting
- Maintenance
- Practical advice
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Fuel and exhaust system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Car body care
- Heater and air conditioner
- Security system
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Ignition system
- Electrical diagrams