1. Open the hood and place it on the support.
2. Remove the rear hood seal from the front shield flanging.
3. Remove the windshield washer hose from the holder on the air intake box grille...
4. ...from below...
5. ...and the upper hose holders on the inner hood panel.
6. And disconnect the hose from the tee
7. On both sides of the car, unscrew the fasteners of the two grille pins...
8. ...and, prying with a screwdriver...
9. ... remove the pins from the body holes and grille.
10. Remove the right half of the grille, passing the windshield washer hose through its opening.
11. Remove the left half of the grille.
12. Install the air intake box grille and all removed parts in the reverse order of removal.