Tightening torques | |
Bolts of fastening of a multipurpose arm on the block of cylinders | 44 Nm |
The lower bolt of fastening of a multipurpose arm on the pallet of a crankcase of the engine | 25 Nm |
Models with a K4M engine with power steering and air conditioning.
Removing
Place the car on a two post lift.
Disconnect the battery.
Remove:
- right front wheel
- right front fender,
- fuel rail protection
- bolts of fastening of protection of the pallet crankcase of the engine,
- protective screen.
Remove the front bumper.
Disconnect the fuel supply line from the fuel rail.
Remove:
- accessory drive belt,
- generator.
- a bolt of fastening of the pipeline of a high pressure of the hydraulic booster of a steering to the block of cylinders,
- power steering pump mounting bolts on multifunction bracket (without disconnecting pipelines).
Attach the power steering pump to the front panel of the body.
Disconnect the A/C compressor connector.
Loosen the A/C compressor mounting bolts.
Attach the A/C compressor to the subframe.
Remove:
- bolts (1) mounting the multifunctional bracket,
- multifunctional bracket.
Installation
Install the multifunction bracket.
Wrap, without tightening, bolts (1) - (6).
Pre-tighten the mounting bolts of the multifunctional bracket (1) And (2) on the cylinder block 5 Nm.
Loosen the bolts (1) And (2) securing the multifunctional bracket by half a turn.
Pre-tighten the bolt securing the multifunctional bracket (6) on the engine sump 5 Nm.
Pre-tighten the mounting bolts of the multifunctional bracket (1) And (2) on the cylinder block 5 Nm.
Pre-tighten in order (3), (4), (5), (6) bolts of fastening of a multipurpose arm on the block of cylinders (5 Nm).
Tighten to the required torque in the order shown (1), (2), (3), (4), (5) bolts of fastening of a multipurpose arm on the block of cylinders (44 Nm).
Torque tighten the lower mounting bolt of the multifunctional bracket on the engine oil pan (25 Nm) (6).
Install the air conditioning compressor.
Connect the A/C compressor connectors.
Install:
- power steering pump,
- a bolt of fastening of the pipeline of a high pressure of the hydraulic booster of a steering to the block of cylinders.
- generator,
- accessory drive belt.
Connect the fuel supply line to the fuel rail.
Install the front bumper.
Install:
- engine undertray protection,
- rail protection.
Connect the battery.