Removing
Disconnect the wires from the battery terminals, starting with the negative terminal.
Remove the power unit and turbocharger.
Pic. 2.261. Removing the exhaust manifold
Unscrew the nuts of the mounting studs and remove the exhaust manifold (pic. 2.261).
Installation
Installation is made in an order, the return to removal.
Pic. 2.262. The procedure for tightening the exhaust manifold nuts
Tighten in the order shown in figure 2.262 the required moment (20 Nm) exhaust manifold nuts.
Install the turbocharger and powertrain.
Attention! When removing and installing the turbocharger, the repair procedure must be strictly followed to ensure the tightness of the system. Failure to follow these instructions may result in reduced driver safety.