Removal and installation the rear anti-roll bar (closed rear axle) (Renault Megane 1)

Removal

1. Block the front wheels and select reverse (or "P"). Jack up the rear of the car and support it on axle stands.



2. Remove the bolts securing the ends of the stabilizer to the rear suspension trailing arms (refer to the accompanying illustration). Remove the spacer plates from the stabilizer mounting nuts from the trailing arms.

3. Remove the anti-roll bar from under the vehicle.

Installation

1. Install the stabilizer, remembering that its brackets should be facing their curved edge towards the front of the car (refer to the accompanying illustration).

2. Place the spacer plates of the mounting nuts on the trailing arms. Install the mounting bolts, placing the handbrake cable mounting brackets in their original place. Tighten the stabilizer mounting bolts to the specified Specifications effort.



3. Lower the vehicle to the ground.

(Original publication on the website: renaultbook.ru)