Attention. Do not turn the engine crankshaft in the opposite direction of rotation.
Attention. Be sure to replace the accessory drive belt.
Removing
Place the car on a lift.
Disconnect the battery.
Remove the engine top cover.
Remove the right front wheel.
Remove the right front fender liner.
Remove the right side reinforcement. Turn the accessory drive belt auto-tensioner clockwise with a 16mm wrench.
Remove the accessory drive belt.
Remove the tension roller.
Installation
Clean the crankshaft pulley streams with a brush from deposits. Install the tension roller.
Torque required (40 N·m) tensioner bolt.
Attention. The accessory drive belt has five grooves and the A/C compressor pulley has six grooves. When installing the belt, make sure that the groove shown by the arrow in the figure remains free.
Install the accessory drive belt.
To correctly install the accessory drive belt on the pulleys, turn the engine crankshaft two turns.
Install in the reverse order of removal.
Connect the battery.