Removing
Place the car on a lift.
Remove:
- top cover of the engine;
- engine crankcase mounting bolts;
- engine undertray protection;
- lower jet thrust.
Install fixture (replaces tool Mot. 1367), consisting of devices for maintaining the engine (Mot. 1672) with tool Mot. 1672, engine support rail (Mot. 1720) and a micrometric depth gauge to determine the size of the connecting rod journals (Mot. 1319).
Disconnect the fuel supply line from the fuel rail (1).
Plug the holes with plugs.
Disconnect the fuel supply line from the right engine swing arm mount.
Remove the fuel supply line from the right engine swing arm mount.
Mark the position of the right swing arm support on the body with an indelible pencil.
Remove:
- fastening bolts (2) from the cover of the right support of the pendulum suspension;
- bolt (3) fixing the silent block of the right support of the pendulum engine suspension;
- the right support of the pendulum suspension of the engine.
Installation
Install the right suspension mount to the engine at the mark made during removal. Torque tighten:
- silent block mounting bolts on the engine pendulum suspension support 62 Nm;
- bolts for fastening the cover of the right pendulum suspension support 62 Nm.
Install the fuel supply wire on the right support of the swingarm of the engine mount.
Connect the fuel supply line to the holder on the right swing arm support.
Remove plugs.
Connect the fuel supply line to the fuel distribution rail.
Remove all fixtures.
Install:
- lower jet thrust;
- engine undertray protection;
- engine crankcase mounting bolts;
- engine top cover.