- Disconnect the fuel supply pipe from the side member.
- Install a tee valve with a pressure gauge with a measurement limit of 10 bar into the gap in the fuel supply pipe from the Mot. 1311-01 kit (Fig. 1.40)
Fig. 1.40. Checking fuel pressure and fuel pump performance
- Disconnect the fuel return line and replace it with a flexible hose, the end of which is lowered into a measuring container with a volume of 2.0 l.
- Turn on the fuel pump for 1 minute and check the pressure value and the amount of fuel in the vessel.
Fuel pressure - 3±0.2 bar.
The amount of fuel in the measuring container is not less than 1.3 l.
[Original article is on the portal: RenaultBook]