Pic. 3.100. Removing the sealing ring
Remove the O-ring, taking care not to damage the splines of the planetary gear (pic. 3.100).
Pic. 3.101. Assembly fixing «gear differential housing»
Fix assembly «gear differential housing» using a device (V.Vi.1057), attached to the crankcase (pic. 3.101).
Pic. 3.102. Removing the body nut
Remove the body nut (pic. 3.102).
Pic. 3.103. Removing the shim to pre-tension the bearings
Remove the bearing pretension shim A (pic. 3.103).
Remove the entire assembly by pushing it towards the planetary gear.
Replacing differential bearings
Pic. 3.104. Removing the bearing with a puller
Slide and remove the bearings with a puller (pic. 3.104).
Installation
To obtain support, substitute the plate under the gear.
Pic. 3.105. Installing a bearing using a tool
With the aid of a device (V.Vi.1059) and press install the bearing against the stop on the housing (pic. 3.105).