Attach an empty syringe with a usable volume of 60 cm3 towards the end of the transparent tube.
Click on the latch.
Pull off the clutch hydraulic line one click.
Turn on the installation pump (Ms. 554-07) and let the liquid fill the syringe.
Slowly and completely expel the fluid from the syringe into the hydraulic clutch (repeat the operation three times).
Close the bleed valve by inserting the hydraulic clutch line as soon as the fluid flows out free of bubbles.
Remove the syringe and clear tubing from the bleed valve.
Put the plug on the bleed valve.
Turn the clutch off and on about ten times.
Add fluid to the reservoir up to the maximum level mark.
Check clutch operation. Repeat if necessary.