Attention! Vehicles equipped with a catalytic converter must not be started by towing or pushing. This can lead to overheating and catalytic converter failure. If the battery is dead, do not attempt to start the engine by towing or pushing the vehicle.
For towing a car (or use it as a towing vehicle) Attach the cable only to the eyelets specially designed for this purpose on the front and rear of the vehicle.
The rear towing eye is located on the right side of the vehicle.
The place for installing the front eye is closed with a plastic cover.
1. Open the trunk. The eye is fixed on its left wall.
2. Remove eyelet assembly with bracket.
3. Disconnect the bracket from the lug.
4. Pry the foot of the bracket...
5....and open the plastic cover.
6. Screw in the eyelet.
7. Remove the lug in the reverse order of installation.
Before towing, turn on the light signaling in accordance with the Rules of the Road.
Attention! The vacuum brake booster and power steering only operate when the engine is running. Therefore, take into account the fact that when towing a car with an idle engine, the force on the brake pedal and steering wheel increases sharply.