Note. Use a reputable brand antifreeze that does not contain hazardous methanol.
When the ambient temperature rises, do not dilute the antifreeze to save money. In addition to an increase in the freezing point, a diluted liquid has a sharp deterioration in detergent properties.
Attention! The manufacturer does not recommend the use of ordinary water to fill the washer reservoir.
Freezing of the fluid in the washer reservoir will destroy it.
If the low fluid level warning light comes on in the washer reservoir, add fluid immediately.
The washer reservoir is located in the engine compartment on the right under the air intake grate.
1. To replenish the reservoir, remove its cap...
2.... and add fluid to the washer reservoir up to the bottom edge of the filler neck.
3. If the washer jet is clogged, clean it with a sewing needle. It can also be used to adjust the direction of the washer fluid jet.
Attention! Use only non-hardened needles or pins to clean and adjust the jet. The broken tip of the hardened needle cannot be removed from the jet hole.