Checking the level and adding working fluid to the power steering reservoir (Renault Logan 1)

You will need: power steering fluid, a clean rag.

Note: Only add ELFRENAULTMATIC D2 fluid recommended by the manufacturer to the power steering reservoir.

The tank is mounted on a bracket in the front center of the engine compartment.



The tank body is marked with "MAX" and "MIN". When the engine is warmed up to normal temperature, the working fluid level should be near the "MAX" mark. When the engine is cold, the working fluid level should not be below the "MIN" mark.

Note: Check the power steering fluid level with the engine not running.

1. Unscrew the tank cap...

Note: There is a filter under the tank cap. Remove the filter periodically and inspect it. If the filter is very dirty, it must be washed.

This note was copied from the resource [Renaultbook.ru]

2. ...and add the required amount of working fluid.



3. Screw the cap back on and wipe away any drips.