Removal
- Disconnect the cable from the negative terminal of the battery.
- Loosen the clamp securing the exhaust pipe (Fig 2.7).
- Unscrew the nuts securing the exhaust pipe to the manifolds of the front and rear cylinder heads.
- Unscrew the bolts securing the exhaust pipe in the area of the catalytic converter and remove the exhaust pipe (rice. 2.8).
- Unscrew the 3 bolts and remove the thermal insulation shield of the manifold.
- Unscrew the 8 nuts securing the manifold and remove the manifold.
Installation
- Install the manifold gaskets with the metal surface facing the manifold.
- When installing the exhaust pipe, first tighten the mounting nuts on the manifold 2 (rice. 2.7) and 3 (rice. 2.8), then clamp (1, fig. 2.7), then make sure the seals are tight.
- Ensure that the thermal insulation shields are in place and securely fastened