Torque | |
Fastening of the brake pipeline to the hydroblock | 14Nm |
Brake pipe fitting on brake hose | 14 Nm |
Removing
Place the car on a two post lift.
Install a pedal hold tool on the brake pedal to reduce the amount of brake fluid escaping.
Remove:
- left front wheel
- engine top cover (if she is).
Remove the mounting brackets (1) noise protection (if she is).
Loosen the noise absorbing material to the side to gain access to the piping.
Unscrew the fitting (2) fastening the brake pipe to the brake hose.
Remove the brake pipe from the retaining bracket.
Disconnect the brake pipeline from the holder.
Loosen the brake pipe union (3) on the hydroblock.
Remove the brake pipe installed between the hydraulic unit and the left front brake hose.
Installation
Install the brake pipe between the hydraulic unit and the left front brake hose.
Fix the brake pipeline in the holder.
Install:
- fitting for fastening the pipeline to the brake hose of the brake mechanism of the left front wheel,
- fitting for fastening the brake pipeline to the hydraulic unit.
Torque tighten:
- fitting for fastening the brake pipeline to the hydraulic unit (14 Nm),
- brake line fitting on the brake hose (14 Nm).
Install the noise absorbing material on the bulkhead.
Install:
- soundproofing brackets (if she is),
- engine top cover (if she is).
Remove the retainer to hold the pedal depressed.
Remove air from the brake system.
Install the left front wheel.