Torque | |
Nuts of fastening of fingers of spherical hinges of racks of the anti-roll bar | 44 Nm |
Bolts of fastening of arms of the stabilizer of cross-section stability | 21 Nm |
Removing
Place the car on a doubling post lift.
Remove:
- front wheels,
- engine undertray protection,
- side skirts of the wheel arches.
Remove:
- bolts (1) stabilizer bar brackets,
- fastening nuts (2) with anti-roll bar brackets,
- anti-roll bar.
Installation
Clean the surfaces of the subframe supported by the stabilizer bar brackets with a surface cleaner.
Parts that must be replaced: anti-roll bar ball joint pin nut.
Installation is made in an order, the return to removal.
Torque tighten:
- nuts of fastening of fingers of spherical hinges of racks of the stabilizer of cross-section stability (44 Nm),
- anti-roll bar bracket bolts (21 Nm).