Torque | |
Bolts of fastening of directing blocks of the forward brake mechanism | 105 Nm |
Upper guide pin bolt | 34 Nm |
Removing
Place the car on a two post lift.
Unlock the steering wheel.
Remove:
- front wheel on the corresponding side,
- front brake pads.
Loosen the top bolt (1) fixing the guide pin, holding the nut from turning (2).
Hang the brake caliper from the suspension spring.
Remove:
- two bolts (3) fastening the guide pads of the front brake mechanism,
- front brake shoe guide.
Installation
Clean with a wire brush and brake cleaner:
- front brake shoe guide,
- front brake caliper,
- rounded fist.
Parts to be replaced: front brake shoe guide bolt.
Apply a high strength locking compound to the threads of the guide shoe mounting bolts before installation.
Parts to be replaced: front brake caliper guide pin bolt.
Install:
- front brake shoe guide,
- front brake shoe guide bolts.
Torque tighten the front brake shoe guide bolts (105 Nm).
Install the top guide pin bolt.
Torque tighten the top guide pin mounting bolt (34 Nm).
Install:
- front brake pads,
- front wheel on the corresponding side.