Removing
Remove the center console.
To loosen the cables in the equalizer area, unscrew the adjusting nut (1) parking brake, noting the size (X) = 16±0.30 mm.
Disconnect both drive cables (2).
Loosen the nuts (3).
Slightly lift the parking brake lever and disconnect the parking brake warning light switch connector (4).
Remove the parking brake lever.
Installation
Install:
- parking brake control knob
- two cables for equalizer,
- parking brake lever nuts.
Connect the parking brake warning light switch connector.
Screw in the parking brake adjusting nut, respecting dimension X = 16±0.30 mm.
Torque tighten the parking brake lever mounting bolts (8 Nm).
Connect the parking brake warning light switch connector.
Adjust the parking brake if the lever does not move when the parking brake lever is moved between the first and second sector teeth.
Incorrect parking brake adjustment:
- excludes the normal operation of the automatic brake pad wear compensation device,
- leading to premature brake pad wear.