Attention!
- The clutch master cylinder pipe must be disconnected from the brake fluid reservoir fitting to prevent foreign bodies from entering the brake system hydraulic actuator.
- Take measures to ensure that leaking brake fluid does not come into contact with surrounding parts.
Note:
- Fill hydraulic line with filter.
- Set the filter head down to ensure it is full.
There are several versions of the pipeline with or without a filter:
Piping without filter
Filling position for pipeline with filter
Filling position for pipeline with filter
Filling position for pipeline with filter
Fill the hydraulic clutch line with a syringe.
Attach a filled line to the end of the clutch slave cylinder to prevent leakage of brake fluid.
Fill the hydraulic tappet with a new syringe (under its own weight).
Install the appropriate part (or details).