K7J engine
1. Remove the air filter. Remove the air filter housing cover and remove the filter.
2. Check the air filter and make sure it is not damaged or has oil stains. Replace the air filter if necessary.
3. Install the air filter.
Air filter (K7J engine) |
K4J engine
1. Disconnect the battery.
Air filter (K4J engine) |
2. Disconnect the brake booster hose from the intake manifold.
3. Disconnect the drive (1) idle speed controller (stepper motor).
4. Disconnect the tube (2) fuel vapor recovery systems.
5. Without disconnecting the hoses, move aside the coolant reservoir.
6. Remove the air resonator.
1 - Air resonator.
7. Turn away bolts (3) attaching the air filter housing.
8. Remove a broad tank.
9. To the right, remove the air filter housing (the filter can pass between the windshield opening, the engine and the brake booster).
10. Installation is carried out in the reverse order.
- Filter mounting bolts - 9 Nm
Note. Be careful when handling exhaust manifold and brake booster vacuum tube fittings. If the fittings break, you will have to replace the intake manifold.