1. Remove the door trim panel.
2. Remove the side impact energy absorber from the door.
3. Unscrew the protective bolts (A) and three side bolts (B) securing the lock.
4. Disconnect the rod (C) of the outer door handle.
5. Remove the clip (D) securing the inner lock control cable.
6. Remove the protective cover (E).
7. Disconnect the lock drive motor connector and remove the motor.
8. Turn the lock towards the door panel in the direction of the arrow (1) to release the pin (F) securing the lock cylinder (see the drawing of the lock elements).
9. Remove the lock in the direction of the arrow (2).
10 Turn the cylinder retaining clip in the direction of the arrow (3) by a quarter of a turn, remove the cylinder from the door panel.
