Removing
- remove the door upholstery as described above;
- detach the protective anti-theft cover (see Figure 9.54);
- inside the door, disconnect the latch and the lock control rod from the lock or handle. When disconnecting the rod from the handle, remember its position in order to facilitate adjustment during installation (see Figure 9.56);
Figure 9.58. Unscrewing the nuts securing the outer handle of the rear door
- unscrew the two nuts securing the handle from the inside of the door (Figure 9.58), unfold the handle and remove it from the outside of the door.
Installation
Installing the handle is carried out in the reverse order of removal.