Removing
Disconnect the wires from the battery terminals, starting with the negative terminal.
The headlight must be removed to replace the xenon bulb.
Pic. 7.21. Removing the headlight with xenon lamps: 1 - latch
To do this, press the latch and cover (pic. 7.21).
Pic. 7.22. Removing the high voltage unit: 1 – high voltage block; 2 - headlight range control actuator
Remove the high voltage block by turning it 1/8 turn counterclockwise (pic. 7.22).
Detach the lamp retainer.
Corrector actuator (stepper motor) not removable.
If the actuator fails, the headlight must be replaced.
Installation
Hold the lamp base.
Attention! Do not touch the lamp with your fingers, and if this happens, wipe the lamp with a soft, lint-free cloth dampened with alcohol.
Pic. 7.23. xenon lamp
Install the lamp (the protrusion must be located opposite the headlamp groove) (pic. 7.23).
Install:
- lamp retainer;
- high voltage block;
- block of power wires.
Note. Use only certified D2S lamps.
Install the headlight.
Adjust headlights.