Contents: Removal 🠛 Installation 🠛
Removal
Disconnect the connector.
Fig. 7.27. Removing the sensor stopper: 1 – stopper
Remove the stopper (Fig. 7.27).
Fig. 7.28. Removing the sensor mounting bolt: 1 – bolt
Unscrew the rear body height sensor mounting bolt (Fig. 7.28).
Installation
Install the sensor with the bracket on the vehicle.
Tighten the front body height sensor mounting bolt to the specified torque of 8 N·m.
Caution: Be sure to replace the stopper after each removal.
Note: The front height sensor has different electronic characteristics than the rear height sensor, so it is very important not to confuse them.
Note: The rear height sensor has a green mark.
Perform ECU calibration.
Adjust the headlights.a