To avoid eye damage, do not look into the xenon lamp when it is turned on (switch-on voltage 20000 V).
Allow the ECU and high voltage units to cool before removing.
It is prohibited to turn on a lamp that is not installed in the headlight unit (it is dangerous for eyesight).
Disconnect the battery. Remove the headlight.
Remove cover 1.
Remove the capacitor 3. by turning it 1/8 turn counterclockwise 2.
Carefully remove the lamp by its base.
Warning! Do not touch the xenon lamp with your hands. If you accidentally touch it, clean the lamp with a lint-free cloth.
Note: Please use certified D2S lamp for replacement.
Attention! Protect the lamp from impacts, the outer wire of the lamp 4 is very fragile and can be easily damaged.
#img5#
Install the bulb into the headlight (the protrusion should be located opposite the cutout in the headlight housing).
Install the capacitor and cover. Install the headlight and connect the battery.