Contents: Replacing the high beam lamp 🠛 Replacing the parking light bulb 🠛 Replacing the low beam lamp 🠛 Replacing the turn signal lamp 🠛
The methods for replacing bulbs vary depending on the engine installed in the vehicle:
- 1. Through the hatch in the fender liner (Fig. 7.10);
- 2. Through the engine compartment.
Fig. 7.10. Hatch in the mudguard, designed for replacing headlight bulbs: 1 – hatch
Replacing the high beam lamp
Fig. 7.11. Plastic cover of the high beam lamp: 1 – lid
Remove the plastic cover and take out the lamp (Fig. 7.11).
Note: When replacing, use only certified H1 bulb.
Replacing the parking light bulb
Fig. 7.12. Plastic cover of the parking light bulb: 1 – lid
Remove the plastic cover and take out the lamp (Fig. 7.12).
Note: When replacing, use only certified W5W lamp.
Replacing the low beam lamp
Fig. 7.13. Plastic cover of the low beam lamp: 1 – lid
Remove the plastic cover and take out the lamp (Fig. 7.13).
Note: When replacing, use only certified H7 bulb.
Replacing the turn signal lamp
Fig. 7.14. Plastic cover of the turn signal lamp: 1 – lid
Remove the plastic cover and take out the lamp (Fig. 7.14).
Note: When replacing, use only certified PY21W lamp.