Note. For headlamp removal and bulb replacement procedures, see «Vehicle operation and maintenance».
Place the car on a flat horizontal platform.
Do not apply the parking brake. Check and top up tire pressure.
Open the hood.
Set the headlight range adjustment knob to position «ABOUT».
Turn on low beam headlights.
Position the headlight adjustment and tester, set to -1%, in front of the vehicle.
Use the headlight adjustment and test tool to check the headlight beam adjustment.
Turn around (1) screw for vertical adjustment.
turn the screw (2) for horizontal adjustment.
Vertical adjustment
Adjust the headlights using the headlight adjusting and checking tool and turning the bolt (1).
Note. A block is provided for access to the headlight beam adjustment bolt.
Adjustment in the horizontal direction
Using the headlight adjustment and test tool, adjust the headlight beam horizontally by turning the bolt (2).
Install a small 8mm ratchet wrench to access the horizontal adjustment bolt (2).
Anti-fog headlight
Place the car on a lift.
Remove:
- front wheels;
- fenders of the front wheel arches;
- front bumper.
Disconnect the fog lamp connector (1).
Remove:
- screws (2) fog lamp mounts;
- fog lamp.
Fog Light Bulb Replacement
Disconnect the fog lamp connector (1).
Remove the fog lamp bulb counterclockwise (2).