- front wheels;
- the front of the front fender liner;
- front bumper;
- headlight.
Tighten the headlight range control bolt a few turns to ease disengagement.
While rotating the headlight range adjustment mechanism, press (1), to unlock the holder (2).
Unlock the headlight range control actuator by turning it 1/8 turn (3) towards the inside of the vehicle.
Slightly shaking the headlight range control actuator, disconnect the ball head (4) from the groove of the holder (5) parabolic reflector.
Note. When installing a new headlight range control motor, tighten the headlight range bolt a few turns.
Remove the cover (6) low beam lamps.
Hold the parabolic reflector at the back of the headlight by pulling on the bulb (7).
Lock ball head (8), by sliding it into the groove of the holder (9) parabolic reflector.
Note. The ball head should not come into contact with the slot in the holder, but completely enter it.
Lock the headlight range control actuator by turning it 1/8 of a turn towards the inside of the vehicle.
Install the cover.
Loosen the headlight adjustment screw by the number of turns made during removal.
Install the parts in reverse order.