Dial type indicator (Renault Logan 2)

The clock-type indicator is designed to measure linear dimensions using absolute and relative methods, to determine the magnitude of deviations from a given geometric shape and the relative position of surfaces. Indicators with a measurement range of 0-2 mm are available in two versions:

ICH - with the movement of the measuring rod parallel to the scale;

IT - with the movement of the measuring rod perpendicular to the scale.

The indicators are attached either to a connecting sleeve with a diameter of 8h7, or to a 5 mm thick eye with a connecting hole with a diameter of 5 mm.

The use of the dial indicator is very diverse, so it is not described here. Specific cases of using the device are described in the repair manual (for example, measuring the axial play of the engine crankshaft, measuring the runout of the brake disc, etc.).

This note was copied from the resource: www.RenaultBook.ru