1. Disconnect the wire from the terminal «minus» battery.
2. Remove the front bumper (see «Removal and installation of a forward bumper»).
3. Remove the protective cover from the headlight range control.
4. Remove the corrector drive cable from the holder...
5.... and disconnect it from the headlight range control.
6. Turn out three bolts of fastening of the block headlight.
7. Take away the block-headlight and disconnect, having pressed a clamp, block of a plait of wires from the direction indicator.
8. Turn the side light bulb socket...
9.... and remove it from the headlight.
10. Press the latch and remove the cover.
11. Disconnect the wiring harness block from the head light lamp...
12.... and remove the headlight.
13. Install the parts in the reverse order of removal, and check that the headlights are adjusted correctly (see «Headlight adjustment»).