The brake light switch is mounted on the pedal assembly bracket.
1. Disconnect the wire from the terminal «minus» battery.
2. Compress clamps and disconnect block of a plait of wires from the stoplight switch.
3. Turn the switch 90°...
4....and remove it.
5. To adjust, pull out the switch stem (clicks will be heard).
6. Install the stoplight switch in the reverse order of removal.
7. Slightly depress the pedal, insert a plate approximately 2 mm thick between it and the switch stem and pull the pedal up (you will hear a few clicks).
8. Remove the plate.
9. Check the operation of the brake lights: when the pedal is released, the brake lights should not burn. Select pedal free play. The brake lights should come on when the pedal is moved within the free play.