You will need a flat blade screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the cover for the radio socket...
3.... and disconnect the wiring harness and antenna wire from it or remove the car radio (depending on configuration).
4. Pry with a screwdriver...
5.... and remove the central trim, overcoming the force of the clamps.
6. Squeeze the latch...
7.... and disconnect the wiring harness block from the switch.
8. Similarly disconnect pads of a plait of wires from other switches.
9. Compress clamps and take the switch from the central overlay.
10. Similarly remove other switches.
11. Install the parts in the reverse order of removal.