You will need a TORX T20 key.
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the upper casing of the steering column, see «Removal and installation of the switch (castle) ignition».
3. Turn out two screws of fastening of a peak of the panel of devices (steering wheel removed for clarity)...
4.... and remove it, overcoming the force of the clamps.
5. Turn out two bolts of fastening of a combination of devices on the right side...
6.... and two on the left.
7. Pull out the instrument cluster...
8....disconnect the right...
9.... and left pads of wiring harnesses and remove the instrument cluster.
10. Install the parts in the reverse order of removal.