Removal
- Remove the generator drive belt.
- Loosen:
- adjusting bolt (E. fig. 2.31) Water pump/air conditioning compressor drive belt;
- the locking nut of the adjusting bolt and unscrew it as much as possible;
- 2 bolts (F) fastening the tension roller of the water pump/air conditioning compressor drive belt.
- Remove the belt.
Installation
- Installation is carried out in the reverse order of removal. It should be remembered that once the belt is loose, it must be replaced with a new one.
- Tension the belt in the same way as the alternator drive belt.
- Install the generator drive belt.