- The filter elements of both filters must be replaced at the same time.
- Disconnect the wires from the battery terminals and the windshield wiper motor connector.
- Working directly on the drive rods, set the wiper arms to a vertical position.
- Remove the soundproofing pads
- Remove the spring cup covers of the shock absorber struts.
- Grasp the old filter element by the tab and remove it. acting in the same way as when removing the spring cup cover of the shock absorber strut.
- Install a new filter element. placing the protrusion on the outside, and the protrusion should fit into the inclined socket
- Install the covers of the spring cups of the shock absorber struts and their soundproofing pads.
- Connect the windshield wiper motor connector and wires to the battery terminals
- The wiper blades will return to their original position when the ignition is turned on.
- Set the clock.
Pic. 14.3. Installing a ventilation system filter element