Contents: Removal 🠛 Installation 🠛
Note: The filter is installed in front of the outside air intake duct and provides filtration and purification of air from contaminants before it enters the passenger compartment.
Removal
Disconnect the wires from the battery terminals, starting with the negative terminal.
Fig. 8.152. Releasing the passenger airbag lock switch from its fastening: 1 – front sill panel trim; 2 – side panel of the instrument panel; 3 – passenger airbag lock switch mounts
Remove the front sill panel trim, the instrument panel side panel and unfasten the passenger airbag cut-off switch (fig. 8.152).
Fig. 8.153. Removing the glove compartment: 1 – mounting screws
Loosen the screws securing the glove box and remove it (fig. 8.153).
Fig. 8.154. Removing the lining
Remove the trim and unscrew the two screws securing the cabin ventilation filter (fig. 8.154).
Fig. 8.155. Removing the filter: 1 – filter
Remove the filter (fig. 8.155).
Installation
Installation is carried out in the reverse order of removal.