Removal
- Disconnect the cable from the negative terminal of the battery.
- Starting at a corner, lift the upper trim of the instrument cluster vertically until the three upper latches are released
- Remove the rear mounting screws for the instrument cluster.
- Remove the side mounting screws located under the buffers in the sound-absorbing foam.
- Pull the instrument cluster forward.
- Disconnect the electrical connectors from the instrument cluster and remove it.
- To access the air distribution unit cover, remove most of the sound insulation
- Remove the screws securing the fan covers and disconnect the electrical connectors from the motors.
- Release the clamps, remove the covers and remove the heater fan.
Installation
- Installation is carried out in sequence. reverse to withdrawal.
Pic. 14.7. Location of fan cover screws