First, remove the ground wire from the battery (minus), to exclude the possibility of a short circuit.
1. Carefully remove the engine hood seal from the front wall in the engine compartment.
2. Disassemble the plastic fairing cover. To do this, unscrew the cross-head screw in the center of the machine at the end.
3. Loosen the negative wire terminal nut, disconnect the wire from the battery terminal.
4. Release the positive wire terminal and remove it.
5. Loosen the fixing screw on the battery platform and remove it.
6. Remove the battery.
7. When installing, slide the battery under the rear mounting.
8. Attach at first a wire of plus, then a wire of weight.
9. You can not mistakenly install the wire terminals, since the fasteners of the negative and positive terminals have different shapes.
10. Lubricate the terminals of the battery with technical petroleum jelly to prevent sulfation.