Pic. 8.69. Location of the airbag control unit
- remove the center console in the cabin (see section «Body»); block is located in front of the gear lever (pic. 8.69);
Pic. 8.70. Removing the air duct fixing screws
- unscrew the heater air duct mounting screws (to the feet of rear seat passengers) (pic. 8.70) and remove the air duct;
Pic. 8.71. Releasing the latch (arrow) and disconnection of the block connector
- release the lock and disconnect the connector (pic. 8.71). Remove the three fastening nuts and remove the block from the vehicle.
Installation order:
Pic. 8.72. The arrow on the block must be directed in the direction of the vehicle
- install the block so that the arrow on the body is directed in the direction of the car (pic. 8.72);
- tighten the three block fastening nuts;
- connect the connector and install the center console as described in section «Body»;
- make sure that no one is inside the vehicle and connect the battery. With the driver's door open, turn on the ignition from outside the vehicle and check that the warning light in the instrument cluster comes on.