- disconnect the wire from the negative battery terminal and wait at least 5 minutes for the control unit capacitors to discharge and the system to deactivate;
- remove the top front panel (see section «Body»);
Pic. 8.67. Disconnecting the central retainer on the passenger airbag module connector
- unplug the central retainer on the connector (pic. 8.67) and disconnect it from the airbag module;
Pic. 8.68. Removing the Passenger Airbag Module (arrows show mounting bolts)
- unscrew the six screws securing the airbag module and remove it (pic. 8.68).
Installation order:
- put the pillow in place and securely screw in the fixing screws. Connect the wiring connector, laying it correctly, and secure the retainer;
- install the upper part of the instrument panel as described in section «Body»;
- make sure that no one is inside the vehicle and connect the battery. With the door open on the driver's side, from outside the vehicle, turn on the ignition and check that the warning light in the instrument cluster comes on.