Attention! Before removing the ECU, be sure to lock it using one of the diagnostic tools.
Removing
Remove the center console.
Cut the rug at the indicated location 1 and fold over the edge.
Remove the left and right air ducts 2 by depressing the spring latches.
Disconnect the ECU connector and remove its mounting bolts.
The ECU contains sensitive components, do not drop it.
When working on the lower part of the body (exhaust system, bodywork, etc.) Do not use a hammer or hit the underside of the vehicle without first locking the ECU with a scan tool.
When installing additional electrical equipment after sales (loudspeaker, burglar alarm or any other device that generates an electromagnetic field) do not place it near the airbag/pretensioner computer.
Installation
Observe the installation direction of the computer. The arrow must point towards the front of the vehicle.
Tighten the bolts to a tightening torque of 8 Nm.