- Connect the Renault XR25 portable diagnostic tool.
- Switch the device to "S4".
- Turn on the ignition without starting the engine.
- Enter code D 0 4.
- The 1st, 3rd, 4th, 5th, 6th and 11th graphic symbols should appear.
- Press the accelerator pedal firmly for 5 seconds.
- Wait until symbol 6 turns off and symbol 2 lights up.
- Release the accelerator pedal and remove your foot from it for 5 seconds.
- Symbol 6 should turn off.
- Only symbols 1, 3, 4, 5 and 11 should be displayed.
- Turn off the ignition.
- Turn on the ignition and enter the code D 0 4.
- Make sure the programming is done properly, otherwise, repeat the programming.
- Turn off the ignition.
- Disconnect the Renault XR25 portable diagnostic tool.
Inappropriate programming can result in the following:
- constant lighting of the control lamp;
- incorrect gear shifting.
- unstable throttle opening;
- unreliable return to the initial position;
- discomfort for the driver's driving
This article is taken from the website (www.renaultbook.ru)