Right: Hidden under the door's inner lining is a multi-pin connector (shown by arrow) electric mirror adjustment mechanism.
 |
 |
1. Loosen the trim mounting screw and remove it through the adjusting head.
2. Carefully remove the foam backing and unscrew the 3 now visible screws and remove the mirror base.
3. If you have electrically adjustable mirrors, remove the door trim and disconnect the connector.
4. Remove the mirror and, if necessary, pull the removed connector through the door cut.
Replacing the outside mirror
How to replace an electrically adjustable mirror with a stopper is described in the section Electric mirror adjustment. A manually adjustable mirror may have a different mirror glass mount (spring ring).
1. Insert a thin screwdriver between the mirror housing and the glass itself.
2. Using a screwdriver, press sideways to pull out the end of the glass retainer spring ring.
3. Remove the mirror.
4. Before installation, insert the spring ring and install it on the stopper.
Information is located on the website: RenaultBook
5. Insert the mirror and press it until it clicks into place.